This antique mantel clock was made by the Waterbury Clock Co., Waterbury, Ct. Please read the full description for valuable clock information. This is the "Cottage Extra" model , circa 1881. Size: 13 1/2 inch by 9 1/2 inch by 4 1/4 inch. The original dial is 7 inch square, with a 5 inch diameter minute track to minute track. the clock is 100% original and completely restored.
The walnut case retains its original finish and has been cleaned and waxed. The finish is absolutely spectacular. It is difficult to believe this is a 123 year old clock. Some veneer patches on the base that was very well done. It appears that the veneer was removed from the sides of the base to repair the front and the sides were color matched to the rest of the clock. As you can see from the photos it was well done. Both top and bottom glasses are original to the case. The reverse painted tablet has a delicate floral design with Roses, the black backing had to be touched up.
The 30 hour time and chime movement has been completely rebuilt. See photo of what a properly restored movement should look like. The hour chime has a very nice deep melodic sound. Identification and dating of the clocks is from the Roy Ehrhardt Books.
Read on , the following is the restoration performed:
All Brass parts polished to a mirror finish and sealed, just as it was done over 150 years ago. As stated previously, the wood case retains a strong original finish. I am a purest and believe in preserving as much as humanly possible. The Value for Good Antiques is in Originality and Condition. Not Damaged, Broken, comprised of non-original parts and overall dirty condition.
The clock movement was completely disassembled and cleaned in an Ultra Sonic cleaner. One main spring had to be replaced, all pivots were resurfaced and polished on the Watch Makers lathe, these were badly scared from lack of service, 9 new bronze bearings were installed into worn pivot holes. I use the more expensive bronze bushings simply because they are harder and last longer than brass bushings. All bushing work is done by hand, not with a drill press or bushing machine. This ensures the bushings are the correct size and are installed perpendicular. Once installed the interior of the bushing is polished with a smoothing broach and the oil sink is hand cut into the front of the new bearing, the back side is cut to remove troublesome burrs. All metal to metal wear was eliminated. The verge was hand stoned and polished with a Sapphire file then trued to the escape wheel. Then the clock is cleaned again in the Ultra Sonic cleaner to remove any metal particles, assembled and lubricated with the finest clock oil. The clock now runs with a very strong pendulum amplitude as it should. I run and test my clocks for 30 days prior to being offered for sale. This is what I do and have done for the last 35 years. As a clock maker, all work is performed to the highest Horological standard.
Basic Information You Should Know!
For those of you who are not familiar with the term "Restoration", this simply means cleaning, waxing and repairing a clock or any other Antique to original condition without alteration. The more an item is original the more it is worth. The less original the less it is worth.
It is much faster and easier to refinish a Antique Clock, however it severely decreases the Antique Value. As a hard core purest I would much rather spend a few days restoring an original finish and bring it back to its original patina. Polishing the Brass will not alter the Antique Value of a clock.
Not everyone can afford or even appreciate this level of restoration. However, that is no reason to perpetuate the misrepresentation and dishonesty by other clock sellers. There is a perfectly good reason why clock sellers will not show you the clock mechanism. #1 their clock is dirty, badly worn and probably not original to the case. #2 if it is shown it does not look like my clock movements. Saying that a clock is running good does not mean it will keep accurate time.
Many of these internet clock sellers claim that they guarantee the clock runs, however when the clock arrives and it does not. When the seller is contacted he simply passes the buck to the shipper that it was damaged in shipping and you the buyer should file a insurance claim. This gets him off the hook for selling a clock that was not in good order to begin with. If not packed properly the shipper will refuse the damage claim, Sound Familiar? My properly restored original Antique Clocks will provide years of uninterrupted service and pleasure. Hope this little tidbit of information aids you in making an intelligent decision on what to buy or NOT. All my clocks come with a correct fitting key, a set of instructions specific to this clock and the best packing in the business. I expect you to take the clock out of the box and have it up and running in a short time.
We have Over 80 restored Antique Clocks to choose from, to see them all go to any Drury House item and type in CLOCK into the search box.
To purchase with MC or VISA please call the Drury House Antique Shop at 802-824 4395 EST
Need Help With Your Drury House Order Call 802-824 4395 EST Between 8AM - 8PM
Holiday Sale Starts Now Marked Sale Price is UP-TO 50% OFF or More on 1500 Antiques Clocks, Collectibles Advertising, Jewelry