Seth Thomas “Bolo” model adamantine mantel clock, completely restored, 100% original, rosewood adamantine mantel clock. Please read the full description and view all photos as they are part of our description. Clock is circa 1915, case is 18 ½” long, 9 ¾” tall, 5 ¾” deep with a 5” diameter dial. The Seth Thomas 89C movement was completely rebuilt. I have added a photo of the movement before it was assembled. All of my mechanical clock movements are completely disassembled for cleaning. The clock is week duration, chimes on the hour the correct hour and once at the half hour on a bell. The clock has a beautiful sound with a deep resonating chime, not tinny. The case was cleaned, polished and waxed. The clock sparkles like the day it was made in 1915. Some minor edge wear and one small area on the left that has a bruise. The brass bezel and 4 brass feet were polished and sealed. The dial was restored. Clock has original pendulum and comes with a non- original double end key. The clock looks spectacular, strong running, sounds wonderful, and keeps accurate time. You should not expect less from a restored antique clock.

Read on…..to learn what a wood case adamantine clock is.

What is Adamantine? It is a finish to which Seth Thomas held the patent on from 1880 to the late 1920’s. Seth Thomas was the only clock maker to make adamantine clocks, NO EXCEPTIONS. Prior to assembling the wood cases, each piece of wood was coated with glue and a precut piece of Celluloid veneer was placed on the wood. The wood sections were placed in a vacuum, air was withdrawn and the celluloid quickly adhered to the wood. The wood was trimmed and then the case was assembled. This is a very strong and durable finish. The celluloid veneer is much thicker than regular wood veneer. Many of the original Seth Thomas factory labels stated, “The finish is strong and durable, cannot be scratched or dented with normal usage, can be washed or cleaned without harm to the polish.” Seth Thomas was the most credible clock maker of his time and put into writing that this was a quality clock and stood behind it. See the Restoration performed below.

All clocks are professionally restored, authenticated and keep accurate time. NO excuses here. We provided operating instructions with our clocks and a KEY or new battery when required.

To purchase with credit cards please use PAYPAL. It is safe, secure, and simple to use. The good news is you do not need a Paypal account. Your credit card will work even if you are not a registered user.

All items at Drury House Antiques are available to purchase, unless they are marked Sold or Sale Pending.

We combine shipping whenever possible.

"THE FOLLOWING IS THE RESTORATION PERFORMED".

All Brass parts polished and sealed, just as it was done over 100 years ago. I am a purest and believe in preserving as much as humanly possible. The Value for Good Antiques is in Originality and Condition. Not Damaged, Broken, or comprised of non-original parts and overall dirty condition. This should be of importance to you if you are a serious collector or just want a good reliable original Antique Clock. Most of you would be astounded at the amount of time, labor, technical know how, clock machinery and stock of obsolete clock materials it takes to do this level of restoration and the dollar figure associated with it.

The clock movement was completely disassembled and cleaned in an Ultra Sonic cleaner. all pivots were resurfaced and polished on the Watch Makers lathe, 8 new bronze bearings were installed into worn pivot holes. I use the more expensive bronze bushings simply because they are harder and last longer than brass bushings. All bushing work in done by hand not with a drill press or bushing machine. This ensures the bushings are the correct size and are installed perpendicular. Once installed the interior of the bushing is polished with a smoothing broach and the oil sinks are hand cut into the front of the new bearing, the back side is cut to remove troublesome burrs. All metal to metal wear was eliminated. The verge was hand stoned and polished with a Sapphire file then trued to the escape wheel. The clock was cleaned again in the Ultra Sonic cleaner to remove any metal particles. At this point the movement was polished as it was originally. It was assembled and lubricated with the finest clock oil. One main spring was replaced with the correct American made springs. The main springs that are currently available are made in China and India which are pure rubbish. The clock now runs with a very strong pendulum amplitude as it should. I run and test All my clocks for 30 days prior to being offered for sale. This is what I do and have done for the last 40 years. As a clock Maker, all work is performed to the highest Horological standard.

Basic Information You Should Know!

For those of you who are not familiar with the term "Restoration", this simply means cleaning, waxing original finishes and rebuilding the clock movement or preserving the integrity of any type of Antique to original condition WITHOUT ALTERATION. The more an item is original the more it is worth. The less original the less it is worth. If the clock movement is changed for whatever reason, the Antique Value is diminished to parts only and can not be valued as a complete original Antique. This in not just my opinion but a fact. Any good Appraiser or legitimate Antique Clock Dealer would be in total agreement. We are at a point in time where completely original Antique Clocks are very few and far between. In many cases it has been considered acceptable to restore an original dial, replace a clock hand, replace a broken door hinge, replace a broken wood pendulum rod, replace broken glass or repaint reverse painted glass. But NEVER replace an original clock movement.

Polishing the Brass will not alter the Antique Value of a clock if it was that way originally. In some cases it is best not to polish the brass.

Not everyone can afford or even appreciate this level of restoration. However, that is no reason to perpetuate the misrepresenting and dishonesty by other clock sellers. Especially those that are replacing clock faces with fake advertising dials, especially Rail Road Dials . Replacing the glass with newly painted advertising to make the clock appear to be something that it never was. Also there is a perfectly good reason why clock sellers will not show you the clock mechanism. #1 their clock is dirty, badly worn and probably not original to the case. When in this condition it will cost you hundreds of dollars to have the movement rebuilt properly. #2 you could see additional holes in the back of the case where the original movement was mounted. if it is shown it does not look like my professionally restored clock movements. #3 The latest deception is that sellers are taking a photo of the movement with a bright flash giving the illusion that the brass movement is clean and bright, but you can still see the dirt and grease around the gear pivots as the penetrate the brass plates. Saying that a clock is running good does not mean it will keep accurate time or even run when you receive it.

Many internet clock sellers claim that they guarantee the clock runs, however when the clock arrives it will not run. When the seller is contacted he simply passes the buck to the shipper that it was damaged in shipping and you the buyer should file a insurance claim. This gets him off the hook for selling a clock that was not in good order to begin with. WARNING, If not packed properly the shipper will refuse the damage claim. Sound Familiar? Yes, rarely a properly packed clock can be damaged, that is why the clock we ship are fully insured. I always have the habit of over packing with plenty of fresh materials to insure it arrives in good order. I am always here, unless out fly fishing, to provide assistance and answer questions. I know my clocks intimately and provide lengthy operation and care instructions to my clock buyers. My properly restored original Antique Clocks will provide years of uninterrupted service and pleasure. Hope this little tidbit of information aids you in making an intelligent decision on what to buy or NOT. All my clocks come with a correct fitting key, a set of instructions specific to this clock and the best packing in the business. I expect you to take the clock out of the box and have it up and running in a short time with a few exceptions and I am here to support you .

ITEM ID
4564
ITEM TYPE
Antique

Drury House Antiques

Seth Thomas “Bolo” Model Adamantine Mantel Clock Completely Restored 100% Original

$695 SALE
$1,200  42% Off 
You save $505


    SHOP SALE up to 50% Off On Antique Clocks Advertising Tins And Signs & Jewelry
    Call for information or help with your purchase. 802-824 4395 EST

    Platinum

    since 2000



    Drury House Antiques


    Joe and Susanne Lyons
    Phone Email Shop Owner
    Weston , VT This Shop is rated Platinum - 1,000 or more sales Platinum Ruby Lane Exclusive since 2000