Seth Thomas Antique Mantel clock, rosewood finish Adamantine. Please read the full description and view all photos they are part of the description. You may purchase this 100% original, completely restored clock for the sale price above. Or you may purchase the identical unrestored, not running, Dana No. 1 model, inventory number 3926 as seen on the right in photo number 2 for half of the sale price of the restored one. These are the last two of 5 we had for sale. These clocks were made in the Seth Thomas factory in Thomaston, Conn., circa 1900. The marked Seth Thomas Movement is original to the case and is a week duration. I professionally rebuilt the movement to new condition. This clock is 100% original and in mint Restored condition. The case, finish, the marked S T movement, hands, dial, bezel, glass convex crystal, pendulum and brass bun feet were all born and raised with the clock. Clock chimes on the half hour and announces the correct hour each and every hour. It is a very nice mellow chime, not harsh and tinny sounding like so many other American Mantle Clocks. The case is 9 1/4" tall, base is 8 1/2" by 5 1/2", the dial is 5" in diameter. Very nice S and T hands, circa 1900. All brass bits were polished to a mirror finish then sealed, just as they were over 100 years ago.
The detailed restoration that was performed is listed below. The two tone red Rosewood Adamantine case was cleaned, polished and waxed. This is about 6 hours of work to get the clock to look like this. Very unusual to see a two tone red Adamantine like this and in near new condition. Like all my mechanical wind up clocks the movement was completely rebuilt. See below for the restoration that was performed. The clock was run and tested for 30 days prior to being offered for sale. Excellent time keeper with a very nice mellow chime. Clock can be shipped USPS Priority Mail. The unrestored Dana no. 1 is complete with pendulum and all parts and it is not in running order. I have always had a preference for Seth Thomas Clocks. Mechanically they were well engineered, constructed with superior brass and steel, wheel work and steel pivots were finely finished. They just don’t wear out like the other Conn. clock makers. This is a good reason why Seth Thomas was the only clock company that was granted contracts to the major railroad companies. The Railroads knew they would continue running and keep perfect time.
WHAT IS THE ADAMANTINE FINISH?
Seth Thomas held the patent on adamantine finishes from 1880 to the late 1920’s. Seth Thomas was the only clock maker to make adamantine clocks, NO EXCEPTIONS. Prior to assembling the wood cases, each piece of wood was coated with glue and a precut piece of Celluloid veneer was placed on the wood. The wood sections were placed in a vacuum, air was withdrawn and the celluloid quickly adhered to the wood. The wood was trimmed and then the case was assembled. This is a very strong and durable finish. The celluloid veneer is much thicker than regular wood veneer. Many of the original Seth Thomas factory labels stated : The finish is strong and durable, cannot be scratched or dented with normal usage, can be washed or cleaned without harm to the polish. Seth Thomas was the most credible clock maker of his time and put into writing that this was a quality clock and stood behind it.
To purchase with credit cards please use PAYPAL. It is safe, secure, and simple to use. The good news is you do not need a Paypal account. Your credit card will work even if you are not a registered user.
All items at Drury House Antiques are available to purchase, unless they are marked Sold or Sale Pending.
"THE FOLLOWING IS THE RESTORATION PERFORMED".
All Brass parts polished and sealed, just as it was done over 100 years ago. I am a purest and believe in preserving as much as humanly possible. The Value for Good Antiques is in Originality and Condition. Not Damaged, Broken, or comprised of non-original parts and overall dirty condition. This should be of importance to you if you are a serious collector or just want a good reliable original Antique Clock. Most of you would be astounded at the amount of time, labor, technical know how, clock machinery and stock of obsolete clock materials it takes to do this level of restoration and the dollar figure associated with it.
The clock movement was completely disassembled and cleaned in an Ultra Sonic cleaner. all pivots were resurfaced and polished on the Watch Makers lathe, 5 new bronze bearings were installed into worn pivot holes. I use the more expensive bronze bushings simply because they are harder and last longer than brass bushings. All bushing work in done by hand not with a drill press or bushing machine. This ensures the bushings are the correct size and are installed perpendicular. Once installed the interior of the bushing is polished with a smoothing broach and the oil sinks are hand cut into the front of the new bearing, the back side is cut to remove troublesome burrs. All metal to metal wear was eliminated. The verge was hand stoned and polished with a Sapphire file then trued to the escape wheel. The clock was cleaned again in the Ultra Sonic cleaner to remove any metal particles. At this point the movement was lightly polished as it was originally. It was assembled and lubricated with the finest clock oil. Two main spring was replaced with the correct American made springs. The main springs that are currently available are made in China and India which are pure rubbish. The clock now runs with a very strong pendulum amplitude as it should. I run and test my clocks for 30 days prior to being offered for sale. This is what I do and have done for the last 40 years. As a clock Maker, all work is performed to the highest Horological standard.
Basic Information You Should Know!
For those of you who are not familiar with the term "Restoration", this simply means cleaning, waxing original finishes and rebuilding the clock movement or preserving the integrity of any type of Antique to original condition WITHOUT ALTERATION. The more an item is original the more it is worth. The less original the less it is worth. If the clock movement is changed for whatever reason, the Antique Value is diminished to parts only and can not be valued as a complete original Antique. This in not just my opinion but a fact. Any good Appraiser or legitimate Antique Clock Dealer would be in total agreement. We are at a point in time where completely original Antique Clocks are very few and far between. In many cases it has been considered acceptable to restore an original dial, replace a clock hand, replace a broken door hinge, replace a broken wood pendulum rod, replace broken glass or repaint reverse painted glass. But NEVER replace an original clock movement.
Polishing the Brass will not alter the Antique Value of a clock if it was that way originally. In some cases it is best not to polish the brass.
Not everyone can afford or even appreciate this level of restoration. However, that is no reason to perpetuate the misrepresenting and dishonesty by other clock sellers. Especially those that are replacing clock faces with fake advertising dials, especially Railroad Dials . Also there is a perfectly good reason why clock sellers will not show you the clock mechanism. #1 their clock is dirty, badly worn and probably not original to the case. #2 you could see additional holes in the back of the case where the original movement was mounted. if it is shown it does not look like my professionally restored clock movements. #3 The latest deception is that sellers are taking a photo of the movement with a bright flash giving the illusion that the brass movement is clean and bright, but you can still see the dirt and grease around the gear pivots as the penetrate the brass plates. Saying that a clock is running good does not mean it will keep accurate time or even run when you receive it.
Many internet clock sellers claim that they guarantee the clock runs, however when the clock arrives it will not run. When the seller is contacted he simply passes the buck to the shipper that it was damaged in shipping and you the buyer should file a insurance claim. This gets him off the hook for selling a clock that was not in good order to begin with. WARNING, If not packed properly the shipper will refuse the damage claim. Sound Familiar? I always have the habit of over packing with plenty of fresh materials to insure it arrives in good order. I am always here, unless out fly fishing, to provide assistance and answer questions. I know my clocks intimately and provide lengthy operation and care instructions to my clock buyers. My properly restored original Antique Clocks will provide years of uninterrupted service and pleasure. Hope this little tidbit of information aids you in making an intelligent decision on what to buy or NOT. All my clocks come with a correct fitting key, a set of instructions specific to this clock and the best packing in the business. I expect you to take the clock out of the box and have it up and running in a short time with a few exceptions and I am here to support you .
All items at Drury House Antiques are available to purchase, unless they are marked Sold or Sale Pending
Antique Mantel Clock Seth Thomas Mantle Clock Dana No. 1 Model Fully Restored 100% Original
$850 30% Off
You save $255