Antique American Banjo Wall Clock, made by the New Haven Clock Co., of New Haven, Conn. Please read the full description. Circa 1910. Clock is 30" long, 10" by 4", 5 1/2" diameter dial. The clock is 100% original and completely restored. The clock retains a strong original finish that was cleaned and waxed. The movement is original to the case and was completely rebuilt. It is a week duration and chimes the hour and half hour. The chimes are what is referred to as a bim bam chime; two hammers strike on two long chime rods each with a different tone. Not one screw has bee replaced on this clock since it was made over 100 years ago. Original components consist of cast metal eagle, dial, hands, pendulum, side arms, convex dial crystal. Both the throat and door glasses are original. The door glass pictures a nautical scene; eight sailing ships and one fishing dingy. There is one small ding in the tail piece, other than that the clock is pristine. Banjo clocks are very popular and have been since their invention by Simon Willard in the early 1800's. These clocks are not rare, hundred and hundreds were made. What is rare is to find one in perfect original condition and fully restored wit original glasses. See photos of this and others we are selling. To purchase with MC or VISA please call Drury House 802-824-4395 EST
"The following is the restoration performed".
All Brass parts polished to a mirror finish and sealed, just as it was done over 100 years ago. I am a purest and believe in preserving as much as humanly possible. The Value for Good Antiques is in Originality and Condition. Not Damaged, Broken, or comprised of non-original parts and overall dirty condition. The clock movement was completely disassembled and cleaned in an Ultra Sonic cleaner. Both main springs had to be replaced, all pivots were resurfaced and polished on the Watch Makers lathe, 8 new bronze bearings were installed into worn pivot holes. I use the more expensive bronze bushings simply because they are harder and last longer than brass bushings. All bushing work in done by hand not with a drill press or bushing machine. This ensures the bushings are the correct size and are installed perpendicular. Once installed the interior of the bushing is polished with a smoothing broach and the oil sink is hand cut into the front of the new bearing, the back side is cut to remove troublesome burrs. All metal to metal wear was eliminated. The verge was hand stoned and polished with a Sapphire file then trued to the escape wheel. The clock was cleaned again in the Ultra Sonic cleaner to remove any metal particles, assembled and lubricated with the finest clock oil. The clock now runs with a very strong pendulum amplitude as it should. I run and test my clocks for 30 days prior to being offered for sale. This is what I do and have done for the last 35 years. As a clockmaker, all work is performed to the highest Horological standard.
Basic Information You Should Know!
For those of you who are not familiar with the term "Restoration", this simply means cleaning, waxing and repairing a clock or any other Antique to original condition without alteration. The more an item is original the more it is worth. The less original the less it is worth. If the clock movement is changed, the Antique Value is diminished to parts only and can not be valued as an Antique.
Polishing the Brass will not alter the Antique Value of a clock.
Not everyone can afford or even appreciate this level of restoration. However, that is no reason to perpetuate the misrepresenting and dishonesty by other clock sellers. There is a perfectly good reason why clock sellers will not show you the clock mechanism. #1 their clock is dirty, badly worn and probably not original to the case. #2 if it is shown it does not look like my clock movements. #3 The latest deception is that sellers are taking a photo of the movement with a bright flash giving the illusion that the brass movement is clean and bright. Saying that a clock is running good does not mean it will keep accurate time.
Many internet clock sellers claim that they guarantee the clock runs, however when the clock arrives it will not run. When the seller is contacted he simply passes the buck to the shipper that it was damaged in shipping and you the buyer should file a insurance claim. This gets him off the hook for selling a clock that was not in good order to begin with. WARNING, If not packed properly the shipper will refuse the damage claim. Sound Familiar? My properly restored original Antique Clocks will provide years of uninterrupted service and pleasure. Hope this little tidbit of information aids you in making an intelligent decision on what to buy or NOT. All my clocks come with a correct fitting key, a set of instructions specific to this clock and the best packing in the business. I expect you to take the clock out of the box and have it up and running in a short time and I am here to support you .
Over 80 restored Antique Clocks to choose from, to see them all go to any Drury House item and type in CLOCK into the search box.
To purchase with MC or VISA please call Drury House 802-824 4395 EST
Need Help With Your Drury House Order Call 802-824 4395 EST Between 8AM - 8PM
Holiday Sale Starts Now Marked Sale Price is UP-TO 50% OFF or More on 1500 Antiques Clocks, Collectibles Advertising, Jewelry