Antique American mantel or shelf clock by the Gilbert Clock Co., Winsted, Conn. 100% original and completely restored. Please read the full description, Circa 1860 – 1870. Exceptional Condition, Very unique case design in rosewood with original finish, both top and bottom reverse painted glasses are original. They have been sealed from behind to prevent any more flaking of the paint. The original enamel on zinc dial has to be professionally restored. The brass hinges, door knob and pendulum are original. They were polished and sealed just as they were 150 years ago. Excellent Gilbert label inside the original finish was cleaned and two coats of cabinet wax applied. The color and rosewood grain are excellent. The case is in superior original condition, nothing broken, nothing missing, very few minor nicks and blemishes which is consistent with a clock this old. The rebuilt movement is original to the case. It is a 30 hour duration, no chime. The clock has been regulated to within 2 minutes a day. See restoration performed below. Clock is 11" tall, 8 3/4" wide, 4" deep. This is a very strong running cottage clock. These clocks in restored original condition are becoming difficult to find. This is a good clock to start collecting while they are still affordable. See photos.
To purchase with credit cards please use PAYPAL. It is safe, secure, and simple to use. The good news is you do not need a Paypal account. Your credit card will work even if you are not a registered user. We also accept US Postal Money Orders.
All items at Drury House Antiques are available to purchase, unless they are marked Sold or Sale Pending
"The following is the restoration performed".
All Brass parts polished to a mirror finish and sealed, just as it was done over 100 years ago. I am a purest and believe in preserving as much as humanly possible. The Value for Good Antiques is in Originality and Condition. Not Damaged, Broken, or comprised of non-original parts and overall dirty condition. The clock movement was completely disassembled and cleaned in an Ultra Sonic cleaner. The main spring was hand cleaned , all pivots were resurfaced and polished on the Watch Makers lathe, 6 new bronze bearings were installed into worn pivot holes. I use the more expensive bronze bushings simply because they are harder and last longer than brass bushings. All bushing work in done by hand not with a drill press or bushing machine. This ensures the bushings are the correct size and are installed perpendicular. Once installed the interior of the bushing is polished with a smoothing broach and the oil sink is hand cut into the front of the new bearing, the back side is cut to remove troublesome burrs. All metal to metal wear was eliminated. The verge was hand stoned and polished with a Sapphire file then trued to the escape wheel. The clock was cleaned again in the Ultra Sonic cleaner to remove any metal particles, assembled and lubricated with the finest clock oil. The clock now runs with a very strong pendulum amplitude as it should. I run and test my clocks for 30 days prior to being offered for sale. This is what I do and have done for the last 35 years. As a clockmaker, all work is performed to the highest Horological standard.
Basic Information You Should Know!
For those of you who are not familiar with the term "Restoration", this simply means cleaning, waxing and repairing a clock or any other Antique back to original condition without alteration. The more an item is original the more it is worth. The less original the less it is worth. If the clock movement is changed, the Antique Value is diminished to parts only and can not be valued as an Antique.
Polishing the Brass will not alter the Antique Value of a clock.
Not everyone can afford or even appreciate this level of restoration. However, that is no reason to perpetuate the misrepresenting and dishonesty by other clock sellers. There is a perfectly good reason why clock sellers will not show you the clock mechanism. #1 their clock is dirty, badly worn and probably not original to the case. #2 if it is shown it does not look like my clock movements. #3 The latest deception is that sellers are taking a photo of the movement with a bright flash giving the illusion that the brass movement is clean and bright. Saying that a clock is running good does not mean it will keep accurate time.
Many internet clock sellers claim that they guarantee the clock runs, however when the clock arrives it will not run. When the seller is contacted he simply passes the buck to the shipper that it was damaged in shipping and you the buyer should file a insurance claim. This gets him off the hook for selling a clock that was not in good order to begin with. WARNING, If not packed properly the shipper will refuse the damage claim. Sound Familiar? My properly restored original Antique Clocks will provide years of uninterrupted service and pleasure. Hope this little tidbit of information aids you in making an intelligent decision on what to buy or NOT. All my clocks come with a correct fitting key, a set of instructions specific to this clock and the best packing in the business. I expect you to take the clock out of the box and have it up and running in a short time and I am here to support you .
Over 80 restored Antique Clocks to choose from,
60 other shoppers have this item in their Cart or Wish List
Sale Final Days, UP TO 50% off or More on CLOCKS, Advertising Signs,Tins, Lamps,Jewelry, Tables
SALE FINAL DAYS, Marked Sale Price is UP-TO 50% OFF on 1200 Antiques, Collectibles