Antique Wall Clock New Haven CambriaAntique Wall Clock New Haven CambriaAntique Wall Clock New Haven CambriaAntique Wall Clock New Haven CambriaAntique Wall Clock New Haven CambriaAntique Wall Clock New Haven CambriaAntique Wall Clock New Haven CambriaAntique Wall Clock New Haven Cambria

Antique Wall Clock, Please read the full description and view all photos. This Clock is a week duration with hourly chime, made by the American Company, New Haven Clock Co., New Haven, Conn. Circa 1875 – 1880. 100% original, completely restored to factory condition. This is the last of two that I owned. The Cambria model is by far the best looking and hardest to find wall clock made by the New Haven Clock Co. This clock was only made for a few short years, The clock is very difficult to find especially the early chiming version and in this original condition.. Case is 41 1/2” tall, 13 1/4” wide at the bottom and 16” wide at the top, 4 3/4” deep with an 8” diameter original dial. Dial measures 7” minute track to minute track. The original finish was cleaned and waxed, it sparkles like the day it was made. I intentionally left the old dirt and wax buildup behind the top. This is how black the entire case was. From a collector’s point of view and as far as the antique value, it is totally correct to save what was there, “original finish”, as opposed to refinishing. There is a very nice factory label on the back which has been sealed with plastic. The marked beat indicator inside of the bottom of the case is very legible. The original dial is enamel on zinc with a German nickel silver bezel. The dial was sent out to have 3 chips in the paint touched up and the Roman numerals strengthened. Well over half of the numerals were washed out. The large 8 day chiming movement is original to the case. This is the earliest version, pre 1880 where the movement is held in with 2 wood blocks and the 4 posts are pinned as opposed to later movements with 4 feet that were screwed to the backboard and the movement held together with 4 machine screws. No extra holes in the backboard. The clock retains the original New Haven brass pendulum and wood stick, original hands, hinges, latch and original dial. The door glass appears to have been replaced somewhere years ago, it is not what I would call brand new glass. The movement has been completely rebuilt to almost new condition. The hourly chime is a lovely sound, not harsh like many American clocks and chimes out the correct number of hours. See detailed restoration performed listed below. This fine antique wall clock looks good, runs accurately and chimes correctly. There is what you should expect from a properly and professionally restored 130 year old original antique clock. This is a large heavy well made clock and I do not cut corners on proper packing. Drury House Antiques has more than 80+ antique clocks to choose from, ALL ON SALE. See photos.

To purchase with credit cards please use PAYPAL. It is safe, secure, and simple to use. The good news is you do not need a Paypal account. Your credit card will work even if you are not a registered user. We also accept US Postal Money Orders.

All items at Drury House Antiques are available to purchase, unless they are marked Sold or Sale Pending

"THE FOLLOWING IS THE RESTORATION PERFORMED".

All Brass parts polished and sealed, just as it was done over 100 years ago. I am a purest and believe in preserving as much as humanly possible. The Value for Good Antiques is in Originality and Condition. Not Damaged, Broken, or comprised of non-original parts and overall dirty condition. This should be of importance to you if you are a serious collector or just want a good reliable original Antique Clock. Most of you would be astounded at the amount of time, labor, technical know how, clock machinery and stock of obsolete clock materials it takes to do this level of restoration and the dollar figure associated with it.

The clock movement was completely disassembled and cleaned in an Ultra Sonic cleaner. all pivots were resurfaced and polished on the Watch Makers lathe, 5 new bronze bearings were installed into worn pivot holes. I use the more expensive bronze bushings simply because they are harder and last longer than brass bushings. All bushing work in done by hand not with a drill press or bushing machine. This ensures the bushings are the correct size and are installed perpendicular. Once installed the interior of the bushing is polished with a smoothing broach and the oil sinks are hand cut into the front of the new bearing, the back side is cut to remove troublesome burrs. All metal to metal wear was eliminated. The verge was hand stoned and polished with a Sapphire file then trued to the escape wheel. The clock was cleaned again in the Ultra Sonic cleaner to remove any metal particles. At this point the movement was polished as it was originally. It was assembled and lubricated with the finest clock oil. Both main springs were replaced with the correct American made springs. The main springs that are currently available are made in China and India which are pure rubbish. The clock now runs with a very strong pendulum amplitude as it should. I run and test my clocks for 30 days prior to being offered for sale. This is what I do and have done for the last 40 years. As a clock Maker, all work is performed to the highest Horological standard.

Basic Information You Should Know!

For those of you who are not familiar with the term "Restoration", this simply means cleaning, waxing original finishes and rebuilding the clock movement or preserving the integrity of any type of Antique to original condition WITHOUT ALTERATION. The more an item is original the more it is worth. The less original the less it is worth. If the clock movement is changed for whatever reason, the Antique Value is diminished to parts only and can not be valued as a complete original Antique. This in not just my opinion but a fact. Any good Appraiser or legitimate Antique Clock Dealer would be in total agreement. We are at a point in time where completely original Antique Clocks are very few and far between. In many cases it has been considered acceptable to restore an original dial, replace a clock hand, replace a broken door hinge, replace a broken wood pendulum rod, replace broken glass or repaint reverse painted glass. But NEVER replace an original clock movement.

Polishing the Brass will not alter the Antique Value of a clock if it was that way originally. In some cases it is best not to polish the brass.

Not everyone can afford or even appreciate this level of restoration. However, that is no reason to perpetuate the misrepresenting and dishonesty by other clock sellers. Especially those that are replacing clock faces with fake advertising dials, especially Rail Road Dials . Also there is a perfectly good reason why clock sellers will not show you the clock mechanism. #1 their clock is dirty, badly worn and probably not original to the case. #2 you could see additional holes in the back of the case where the original movement was mounted. if it is shown it does not look like my professionally restored clock movements. #3 The latest deception is that sellers are taking a photo of the movement with a bright flash giving the illusion that the brass movement is clean and bright, but you can still see the dirt and grease around the gear pivots as the penetrate the brass plates. Saying that a clock is running good does not mean it will keep accurate time or even run when you receive it.

Many internet clock sellers claim that they guarantee the clock runs, however when the clock arrives it will not run. When the seller is contacted he simply passes the buck to the shipper that it was damaged in shipping and you the buyer should file a insurance claim. This gets him off the hook for selling a clock that was not in good order to begin with. WARNING, If not packed properly the shipper will refuse the damage claim. Sound Familiar? I always have the habit of over packing with plenty of fresh materials to insure it arrives in good order. I am always here, unless out fly fishing, to provide assistance and answer questions. I know my clocks intimately and provide lengthy operation and care instructions to my clock buyers. My properly restored original Antique Clocks will provide years of uninterrupted service and pleasure. Hope this little tidbit of information aids you in making an intelligent decision on what to buy or NOT. All my clocks come with a correct fitting key, a set of instructions specific to this clock and the best packing in the business. I expect you to take the clock out of the box and have it up and running in a short time with a few exceptions and I am here to support you .

ITEM ID
10432ac
ITEM TYPE
Antique

Antique Wall Clock New Haven Cambria

$1,395 $2,500 SALE

Add to Cart
Email Shop Owner

2 other shoppers are interested in this item


    SALE UP TO 50% Off On CLOCKS,Fishing, Advertising Signs, Tins, Lamps, Jewelry, Tables
    Call for information or help with your purchase. 802-824 4395 EST

    since 2000

    calculating shipping...


    Drury House Antiques


    Joe and Susanne Lyons
    Weston , VT Platinum Platinum Ruby Lane Exclusive since 2000