Cast Iron Mammy Feeding Baby Mechanical BankCast Iron Mammy Feeding Baby Mechanical BankCast Iron Mammy Feeding Baby Mechanical BankCast Iron Mammy Feeding Baby Mechanical BankCast Iron Mammy Feeding Baby Mechanical Bank

This reproduction cast iron bank example depicts a Mammy-type character in a red dress and white apron holding an infant. A coin placed onto the spoon will slide into the baby's mouth when a knob on the back of the bank is pushed. The original "Mammy and Child" mechanical cast iron bank was made by Kyser & Rex of Philadelphia in the late 1880's. An image of an example of the original bank is included in this listing. Although by comparison it is easy enough to see there is little to compare with the original in quality, we note the original example is the example in the blue dress and a green background.

Note the Philip's head screw holding the halves of the reproduction bank together. This type of screw should not be expected in an authentic mechanical bank. The images provided also illustrate well the roughly sanded surface of the new bank. Compare it to the smooth surface and obvious patina of the old.

This example measures approximately 7 and 1/4" tall but other sizes may be available on the current market.

When considering the purchase of a cast iron item keep the tips below in mind. For practice, see how many other tips offered in the list might also be applicable to this item.


1. New reproductions of vintage cast iron toys/banks will be heavier and less detailed than an original counterpart.

2. The individual pieces often don't fit well together. Look for misalignment's and gaps at seams where the pieces meet.

3. Very fine sand was used in the creation of old cast iron pieces, so expect them to be extremely smooth, with fine detail. Surfaces of old cast iron will feel almost silky to the touch.

4. The makers of newer cast iron pieces use a rougher, less expensive sand for casting that results in a surface that is rough and/or grainy, sometimes pebbled. Detail is usually poor, as well, often bordering on crudeness. If it doesn't look as if a skilled craftsman made it, it's almost certainly a contemporary piece.

5. Look for flash (excess metal) at seams or on design elements - inside the spokes of a wheel, for instance, or inside edges on the coin slot of a bank. Even inside the crevices of intricate details like scroll work can be expected to be well finished in antique pieces. Very little to no flash will be present on an authentically old piece.

6. Visible rough grinding marks are the hallmark of the modern power tool. Finishing marks should be virtually invisible on an old piece.

7. Expect an old piece to have a better level of detail to the paintwork. On figural pieces, look carefully at faces as they should not look crudely (quickly) painted. Newer pieces are usually mechanically spray painted with a thin layer of paint, although not always.

8. Patina can be faked, so look for evidence it has been wiped on with a brush or rag at the factory. Other ways to quickly give the appearance of age to new cast iron is to bake newly applied paint in an oven or bury an item briefly to achieve some authentic appearing rusted areas.

9. Sandpapering or abusing an item in some other way after new paint has been applied is done in an effort to mimic the appearance of play wear or use. New items may have 'wear,' but it often won't be in areas of the piece where it would logically be found. Wear in inappropriate areas and pristine surfaces where wear should logically be expected, invariably equals fakery.

10. Authentically old pieces won't be held together with modern Phillip's head screws. However, seeing a slotted screw under 'original' paint doesn't automatically mean a piece must be all right. Since collectors got wise to this fact, many newer cast iron fakes and reproductions are now produced with slotted screws that closely resemble those that would be found in authentic pieces.

11. Reproductions and fantasy items currently in production today are rarely marked. They might originally sport a paper label but, generally, soon after delivery to the first wholesale buyer a paper label tends to `fall' off.

Quite a few 19th and early 20th century foundries incorporated a mark, name or patent number into their molds. However, since some reproductions are produced from molds made from an original piece, as with many other types of collectibles, a maker's name isn't always proof the item is authentic.

Item ID: 2007RP00052

Cast Iron Mammy Feeding Baby Mechanical Bank

$400 USD

Questions about this item?
Email Shop

Modern Reproductions, Fakes and Fantasies

Ruby Lane

Illustrations and Characteristics for Help in Identifying Many Confusing New Items

Item listings in this shop are intended to be viewed for educational purposes, only. Items in this shop are not for sale.

Member since 2007

More from Modern Reproductions, Fakes and Fantasies