Antique sand-cast and lathe finished brass candlestick with round base, ornate bands and knops, and urn-shaped candle cup with fixed rim (see all Photos). The stem, cup and nozzle were cast in two halves and then brazed (soldered) together leaving behind a vertical seam composed of slightly different colored metal (due to the solder) that stops at the top of the base (see Photos 2, 3, 4). The round base is also cast but produced in a single casting with its underside lathe skimmed to remove the rough surface (see Photos 5 and 6). This candlestick is taller than the average candlestick from the 1700s or 1800s and measures 11 1/2 inches in height. It is more than 2 to 3 inches taller than most typical late 1700s candlesticks (see Photo 7). Only the tall classical candlestick with urn shaped candle-cup shown all by itself in the first seven Photos is for sale here. The other items shown in Photos 8 and 9 are not for sale at this time.
Classical style brass candlesticks with urn-shaped candle cups were popular in the late 1700s. They were produced in America and England between about 1770 and 1810, hence the c1790 mid-date (e.g., see Kaufman 1968: page 239 bottom right for a photo of a nearly identical pair in the Henry Francis Du Pont Museum collection). This candlestick is in good condition with no major dents or cracks. It does have an old repair to its lower stem (see full Condition notes farther below). It weighs about 1 1/2 lbs and sits flat on a round base and does not wobble. The stem is firmly threaded into to the top of the base and was subsequently soldered so that the stem cannot be unscrewed and disassembled (see Photo 7 where lowermost pencil points to soldered junction between base and stem). There is also a repair using solder just above the junction between the stem and base (see Photo 7 where uppermost pencil points to upper repair). The stem is perfectly vertical and stands upright while the repair is professional and solid. The repair work was likely completed more than 150 years ago and used good quality solder that is comparatively hard.
And as the Photos illustrate, this antique brass candlestick has nice molded accents, lathe tooled bands and incised lines (see Photos 2, 3 and 4). In all, there are thirteen recognizable decorative bands, rings, incised lines, and lathe cut ridges and knops. The workmanship is good and subsequent brass candles sticks produced in the early 1800s demonstrate a notable declined in lathe cut accents as larger knops came into fashion along with taller pedestal-like square or rectangular bases (see examples #126 and #128 on page 214 and page 216, respectively, for typical mid 1800s candlesticks in the Donald L. Fennimore, Metalwork in Early America: Copper and its Alloys from the Winterthur Collection published in 1996).
Finally, there are no makers names or factory marks on this candlestick. Consequently, we do not know exactly who made it. It may be either American or English in manufacture and once had a working push up that no longer moves. And as always, this antique brass candlestick also comes with my 100% guarantee or you may return it via my return policy for a refund (see full return policy given farther below for all details).
SIZE: This candlestick stand about 11 1/2 inches tall, has a base that measure about 4 1/2 inches across (diameter) and has a wax catcher rim (fix bobeche) that measures about 2 1/4 inches across. The inside diameter of the candle cup at its rim is about 1 inch across. This is a wonderful antique sand cast and lathe turned vertically seamed brass candlestick that is over 210 years old. It a nice large size for displaying on a shelf, table, counter or mantle and will certainly draw attention and interest.
CONDITION: This tall antique candlestick is in good condition with no current fractures or cracks and just two very old soldered repairs (see Photo 7) with the upper one correcting a former fracture or break. The vertical seam on the short section of the stem below the upper soldered band is rotated about 30 degrees counter clockwise to the seam above the band indicating that the stem was once broken and severed before it was repaired. The repair is professional and the stem stands perfectly upright and straight today as it was when it was first produced (see all Photos). The candle stick has no other repairs and no major dents or scratches. It sits perfectly flat and does not wobble. There is old wax inside the candle cup and on the rim. The button tab on the bottom of the iron push up shaft is missing and the push up no longer moves freely (one might be able to clean it to get it working again, but no guarantee are offerd ). The brass displays some oxidation from age but no pitting or corrosion. It has not been polished in many decades. Of course and as always, if the buyer is not 100% satisfied, then she/he may return this antique brass candlestick for a refund (see our refund policy noted below for all details).
SHIPPING: All US mainland buyers pay $10.70 for well packed USPS ground estimated savings of $2 to $4 since insurance and tracking are INCLUDED in this amount. A faster shipping option is also available (see Shipping menu). That is, the insured postage you pay for delivery in the US is always less than our actual costs or we refund the difference back to you, and there are never any handling or packing fees added to any of your Docs Antiques purchases, ever. All international buyers will also pay less than the actual shipping costs for all verifiable locations outside the Continental US mainland. Send us your address and we will email you up to four options for sending this item to your country. We only use the USPS for International shipping to reduce broker fees and certain Custom’s charges when an item is over 100 years old. Please note that International import duties, taxes and other special charges are not included in the item price or our shipping costs and these additional charges are the Buyer's responsibility. We do offer a petition waiver for VAT relief on the behalf of the buyer which may help reduce certain import taxes when your country grants such petitions for items over 100 years old and the shipping option you select allows a waiver request to be included. Please check with your country's Customs Office to determine what these additional costs will be prior to purchasing this item -- thanks.
RETURN POLICY: Satisfaction and peace of mind are guaranteed for all Docs Antiques listings here on Ruby Lane. And this means that if the buyer is unhappy with a purchase, then she/he may return it by sending the item back undamaged and post marked within fourteen days of the original receipt of the item at your address for a refund (certain shipping costs are non-refundable, please insure the item upon return and add tracking). Items damaged by shipping in the US are covered by insurance and while this rarely happens because we double pack, we will gladly help you file your insurance claim should it ever be necessary. Of course, never send an item back that has been damaged by shipping since that will void the original insurance. Instead, contact us for help if you have any questions and we will gladly assist.
PAYMENT OPTIONS: Checks on US Banks (no temporary checks, all checks must have 9 digit routing code; item ships after check fully clears), USPS money orders, PayPal, or contact us with your verified address for more options. If you wish to use a credit card by way of PayPal, then that option becomes available after you submit a Ruby Lane purchase order. Once submitted, a PayPal icon will appear at the bottom of this listing and then you may proceed from there if you wish to pay via PayPal by way of a credit card. Or see our Terms of Sale for additional information should you wish to request a customized layaway plan customized to your own needs and situation (email me a request for a customized layaway). Thanks for looking and we invite you back again when you have more time.