Vintage Custom made diamond ring in 14 karat yellow and white gold. No stamp, I acid tested top and bottom, it is 14 karat gold. This ring is 15 mm wide in the front and 10 mm wide at the back. The largest diamond is a 3/4 ct round. It is a good I/1. Please see close up photo, it has a small centrally located inclusion that can be seen easily with a loupe, but not with the eye. The other five larger round diamonds are a 1/4 ct, and four roughly 1/5 Ct rounds' (note: one is a transitional brilliant cut), and a .06 ct round brilliant. These larger diamonds are all bezel set, and have an average color of H/I, and an average clarity of SI1. The ring has thirty three single cut diamonds, all flush bead set , these diamonds average G/H in color , and SI2 in clarity. This ring has a total diamond weight of 2.00 CTW. Two of the single cut diamonds are chipped. We could replace for purchaser but truly the chips are hard to find even under my gem scope. This ring spent a day in the ultrasonic to check for loose diamonds, one came out and we reset and tightened. The jeweler who made this ring was expert at his craft. My husband (the jeweler) admired how symmetrical and in proportion the ring is. It has no rough places, no edges left unsoldered to catch on things. This ring is a 6.5. I wear a 6.5 and can get this ring on but find it tight.The benefit of a ring this wide is that it will not spin on your finger.When wearing a ring this wide you must add between 1/2 to 1 full size to your normal thin shank ring size. We can size this ring up , or down, for purchaser at no charge. Rings sized by us may be returned, rings sized elsewhere may not.I am a Graduate Gemologist (1995) and retired jewelry store owner (18 years), and my husband is my jeweler. Priority shipping is $7.50 , signature required 2 week return
18 other shoppers have this item in their Cart or Wish List
VIntage is best!
New to Ruby Lane but not new to Vintage Jewelry