Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece

This vintage glass root beer mug is oversized with a lid and pump for dispensing root beer syrup. This is an item that would have been found in an old soda fountain on the back bar to advertise the syrup company, in this case Rochester. The root beer would have been made with the syrup from the dispenser and soda water. The clear glass mug has 1/2" vertical panels on the inside and is also detailed with a group of horizontal rings toward the top edge and toward the bottom edge on the outside. Between the rings it is etched; Rochester Root Beer on one side only. The handle is molded on and the bottom has a recessed star pattern. The lid is nickeled brass with the initials JHS stamped in the top. There is a plunger in the center and a raised spout to one side. The pump mechanism is attached to the lid and is made of brass and cast aluminum. Into the top portion of the cast aluminum it is stamped Pat. Pend. and then a company name and then St. Louis. Unfortunately I have been unable to make out the company. The glass has bubbles and mold creases from manufacturing.

Overall it measures about 13 3/4 " tall to the top of the plunger and is in good condition with minimal wear. There is a "bruise" to the glass on the back toward the bottom edge as shown in the photos. The nickel on the lid is in pretty good original condition with a minimal amount of dark speckling and a very small amount of brass showing through. The mug measures about 5 3/4" in diameter excluding the handle. Email for more photos.

The pictures are not shown at actual size. Please refer to the description for actual measurements.

Don't forget to check out the other antique and collectible soda fountain and advertising items in our shop!

Use the shipping calculator to determine shipping costs HOWEVER, we use FedEx instead of UPS and the shipping could be less. Foreign shipping will be determined by the receiving country. Please read our home page regarding payment options and shipping policies. Thank you.

Item ID: 17862


We'll always do our best to keep your shipping costs down

Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece

Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece
Rochester Mug Root Beer Dispenser - Old Soda Fountain Advertising Piece

This vintage glass root beer mug is oversized with a lid and pump for dispensing root beer syrup. This is an item that would have been found in an old soda fountain on the back bar to advertise the syrup company, in this case Rochester. The root beer would have been made with the syrup from the dispenser and soda water. The clear glass mug has 1/2" vertical panels on the inside and is also detailed with a group of horizontal rings toward the top edge and toward the bottom edge on the outside. Between the rings it is etched; Rochester Root Beer on one side only. The handle is molded on and the bottom has a recessed star pattern. The lid is nickeled brass with the initials JHS stamped in the top. There is a plunger in the center and a raised spout to one side. The pump mechanism is attached to the lid and is made of brass and cast aluminum. Into the top portion of the cast aluminum it is stamped Pat. Pend. and then a company name and then St. Louis. Unfortunately I have been unable to make out the company. The glass has bubbles and mold creases from manufacturing.

Overall it measures about 13 3/4 " tall to the top of the plunger and is in good condition with minimal wear. There is a "bruise" to the glass on the back toward the bottom edge as shown in the photos. The nickel on the lid is in pretty good original condition with a minimal amount of dark speckling and a very small amount of brass showing through. The mug measures about 5 3/4" in diameter excluding the handle. Email for more photos.

The pictures are not shown at actual size. Please refer to the description for actual measurements.

Don't forget to check out the other antique and collectible soda fountain and advertising items in our shop!

Use the shipping calculator to determine shipping costs HOWEVER, we use FedEx instead of UPS and the shipping could be less. Foreign shipping will be determined by the receiving country. Please read our home page regarding payment options and shipping policies. Thank you.

Item ID: 17862


We'll always do our best to keep your shipping costs down

$795 USD

Add to Wish List

Ogee's Antiques


Debra & Robert Helton, Eagle, ID   

We are now accepting Amazon Payments as well as PayPal for your shopping convenience.

Ruby Lane Shop Rating
Platinum Rating Platinum
Exclusive Ruby Lane Member since 2002

We do offer layaways. Our Home page describes the details. Email if you have any questions.

Shipping/Handling:To Be Determined
Insurance:$10.95 USD

Price for shipping to USA change location


Estimate shipping to a different location:




Traditional Payments